Liquid Applied Waterproofing Membranes

Bakor's Aqua-Bloc® membranes are cold applied liquid waterproofing membranes which cure to form a seemless membrane with excellent physical properties. Aqua-Bloc® membranes may be troweled or spray applied to various substrates in both horizontal or vertical applications. Use Aqua-Bloc® membranes to waterproof foundation walls, tunnels, podium decks, planters or excavations over shale.

Aqua-Bloc® Membranes Feature:

Complete adhesion to the substrate
Seamless (joint-free) membrane
Ease of detailing around penetrations
Water-based formulation for applications on green concrete or ICF forms
Solvent-based formulation for cold weather application

Choose From One of Four Aqua-Bloc^® Products

Aqua-Bloc® 770-06

Aqua-Bloc^® 770-06 is a one-component, elastomeric waterproofing membrane. It is applied in a single or reinforced application and cures through solvent evapouration to provide a heavy-duty, seamless, rubber-like impervious membrane. Aqua-Bloc^® 770-06 can be trowel or spray applied.

Choose Aqua-Bloc^® 770-06 for cold weather applications or to waterproof smaller areas where application by trowel is more practical.

Aqua-Bloc® 720-38

Aqua-Bloc^® 720-38 is a one-component, elastomeric emulsion waterproofing membrane. It is applied in a single or reinforced application and cures to provide a heavy-duty, seamless, rubber-like impervious membrane. Aqua-Bloc 720-38 can be trowel or spray applied.

Aqua-Bloc^® 720-38 is ideal for waterproofing ICF (insulated concrete forms) or green concrete applications. It can be used to waterproof smaller areas where application by trowel is more practical.

Aqua-Bloc® 720-33

Aqua-Bloc^® 720-33 is an elastomeric, emulsified asphalt membrane designed for waterproofing foundation walls made of concrete, concrete block or insulated concrete forms (ICF). It is applied with suitable spray equipment and a setting agent to acheive an immediate set-through upon application. Complies with and exceeds the requirements of CAN/CGSB 37.1M

Choose Aqua-Bloc^® 720-33 for projects requiring low VOC, low odour applications. It is excellent for use on green concrete or to waterproof insulated concrete forms (ICF) or on projects where a fast set-through of membrane is required due to quick backfilling requirements.

Aqua-Bloc® 720-34

Aqua-Bloc^® 720-34 is a non-asphaltic, elastomeric polymer emulsion designed for waterproofing foundation walls and other commercial structures. It is applied with a setting agent to achieve an immediate set-through upon application.

Choose Aqua-Bloc^® 720-34 for projects requiring low VOC, low odour applications. It is excellent for use over green concrete or on projects where a fast set-through of membrane is required due to quick backfilling requirements.